Tod osier
WKR
I have a couple of SWFA 2.5-10 Ultralights with the BDC reticle in use where I'd like to reset the parallax. The parallax on these is set at 150 yards and I'd prefer closer (one is on crossbow and the other for a .22). The rimfire version with duplex crosshairs comes set at 50 yards and the regular ultralight comes in at 100 yards, so it seems that the design could accommodate the adjustment.
I've done some reading on resetting parallax on non adjustable scopes. All the discussion revolves around scopes that you can remove the end of the objective bell on the scope (like a Leupold) and then adjust parallax by screwing the lens carrier in or out once you expose it.
These scopes are built differently, but look very much like there is a lock ring and then a second ring that could be the lens carrier adjacent to the objective. Anyone have comments or guidance?
Photos of 2 different SWFA SS 2.5-10x32 Ultralights:
I've done some reading on resetting parallax on non adjustable scopes. All the discussion revolves around scopes that you can remove the end of the objective bell on the scope (like a Leupold) and then adjust parallax by screwing the lens carrier in or out once you expose it.
These scopes are built differently, but look very much like there is a lock ring and then a second ring that could be the lens carrier adjacent to the objective. Anyone have comments or guidance?
Photos of 2 different SWFA SS 2.5-10x32 Ultralights: