I just got this newsletter from Bellm T/C. I've worked with them before and they are T/C accurizing gurus. If you're shooting the muzzleloader or any cartridge in the Encore, G2, and Contender platforms, they can help you make that gun shoot better. They are not a Rokslide sponsor but were such a good company to work with, wanted you all to hear about them.
Time to gear up for fall hunts!
This Mike Bellm TC's Newsletter is a quick checklist and guide to what you need to keep your break open guns accurate, and dependable.
See www.bellmtcs.com for:
TC Encore and Contender barrels http://www.bellmtcs.com/store/index.php?cid=694
Bellm custom TC tools, parts, springs, & instructions (see our extensive coverage in our site menu list),
TC forends, grips, buttstocks, http://www.bellmtcs.com/store/index.php?cid=604
Muzzle loader accessories & breech plugs, http://www.bellmtcs.com/store/index.php?cid=617
Bellm custom TC springs for Encores, G2s, and Contenders (see our extensive coverage in our site menu list)
Our HD, stronger firing pin return spring, is especially needed for muzzle loader barrels due to the blow by that tends to make the firing pin hang up
http://www.bellmtcs.com/store/index.php?cid=615
.357 Remington Maximum handgun barrels:
15" blued Shilen/MGM Encore barrels in stock, email [email protected]
12" blued TC .357 MAGnum G2 & Contender barrels, $295, plus $95 ppd rechambered by Mike Bellm to .357 Maximum.
And with the growing demand for .357 Remington Maximum barrels and the shortage of ammo and brass, we are excited to have a line on LOADED .357 Remington Maximum AMMO available NOW!
http://www.bellmtcs.com/store/index.php?cid=697
When you have "fur" in your sights this fall, you have to know the gun will not only fire but put that bullet where you want it. Helping make sure that happens is what www.bellmtcs.com is all about.
Don't overlook any of the important issues described and linked to from the "........ Start Here!" page at the top of our menu list, http://www.bellmtcs.com/store/index.php?cid=562 and be a good Samaritan helping your fellow TC shooters to also get the reliability and accuracy potentials of the break open single shot guns we support.
Here is a quick check list of the most important steps:
1) Tighten up the hinge with our Oversize Hinge Pin system, the easiest, cheapest, and often the best improvement to accuracy you can readily do yourself.
http://www.bellmtcs.com/store/index.php?cid=7
2) Measure and adjust the headspace produced by the ammo you are shooting.
http://www.bellmtcs.com/store/index.php?cid=172
3) Install one of our stronger hammer springs in your Encore or G2 frames, http://www.bellmtcs.com/store/index.php?cid=86
or a fresh hammer spring in your Contender frames, http://www.bellmtcs.com/store/index.php?cid=184
4) Get the trigger pull to a level that lets you do your best shooting, especially with the Encore and G2 frames. We are THE source for the instructions, tools, and springs you need to do it yourself or one of the shops we recommend. Trigger work items are given top priority in our menu list!
If you need to rely on your local gunsmith, please point him to www.bellmtcs.com for everything he needs to do the job right.
Whether you do-it-yourself or rely on your local gunsmith, you will find a full complement of all the Contender springs also, as well as the frequently lost forend dovetail locks:
http://www.bellmtcs.com/store/index.php?cid=624
Cold, gloved fingers need a firm grip on the hammer, and there is no safer, more secure means of getting a grip on the hammer than our Triple Lock hammer extension:
http://www.bellmtcs.com/store/index.php?cid=93
I strongly recommend keeping the Pro Hunter swivel hammer pointed to the rear and installing our hammer extension. In my opinion it is far safer than the angled Swivel Hammer spur position.
Forend, grip, and buttstock screws:
http://www.bellmtcs.com/store/index.php?cid=592
Weaver and Weaver type scope bases seem to be the most popular, and one of the best choices for a rugged, economical Weaver scope rings are the Weaver Tactical rings:
http://www.bellmtcs.com/store/index.php?cid=613
See more about Bellm TC's and connect with us on
LinkedIn: http://www.linkedin.com/pub/kurt-michael-bellm/77/508/128?trk=shareTw
and "Like" us on Facebook: https://www.facebook.com/bellmtcs
Wishing you a fantastic fall hunting season!
Mike Bellm
Time to gear up for fall hunts!
This Mike Bellm TC's Newsletter is a quick checklist and guide to what you need to keep your break open guns accurate, and dependable.
See www.bellmtcs.com for:
TC Encore and Contender barrels http://www.bellmtcs.com/store/index.php?cid=694
Bellm custom TC tools, parts, springs, & instructions (see our extensive coverage in our site menu list),
TC forends, grips, buttstocks, http://www.bellmtcs.com/store/index.php?cid=604
Muzzle loader accessories & breech plugs, http://www.bellmtcs.com/store/index.php?cid=617
Bellm custom TC springs for Encores, G2s, and Contenders (see our extensive coverage in our site menu list)
Our HD, stronger firing pin return spring, is especially needed for muzzle loader barrels due to the blow by that tends to make the firing pin hang up
http://www.bellmtcs.com/store/index.php?cid=615
.357 Remington Maximum handgun barrels:
15" blued Shilen/MGM Encore barrels in stock, email [email protected]
12" blued TC .357 MAGnum G2 & Contender barrels, $295, plus $95 ppd rechambered by Mike Bellm to .357 Maximum.
And with the growing demand for .357 Remington Maximum barrels and the shortage of ammo and brass, we are excited to have a line on LOADED .357 Remington Maximum AMMO available NOW!
http://www.bellmtcs.com/store/index.php?cid=697
When you have "fur" in your sights this fall, you have to know the gun will not only fire but put that bullet where you want it. Helping make sure that happens is what www.bellmtcs.com is all about.
Don't overlook any of the important issues described and linked to from the "........ Start Here!" page at the top of our menu list, http://www.bellmtcs.com/store/index.php?cid=562 and be a good Samaritan helping your fellow TC shooters to also get the reliability and accuracy potentials of the break open single shot guns we support.
Here is a quick check list of the most important steps:
1) Tighten up the hinge with our Oversize Hinge Pin system, the easiest, cheapest, and often the best improvement to accuracy you can readily do yourself.
http://www.bellmtcs.com/store/index.php?cid=7
2) Measure and adjust the headspace produced by the ammo you are shooting.
http://www.bellmtcs.com/store/index.php?cid=172
3) Install one of our stronger hammer springs in your Encore or G2 frames, http://www.bellmtcs.com/store/index.php?cid=86
or a fresh hammer spring in your Contender frames, http://www.bellmtcs.com/store/index.php?cid=184
4) Get the trigger pull to a level that lets you do your best shooting, especially with the Encore and G2 frames. We are THE source for the instructions, tools, and springs you need to do it yourself or one of the shops we recommend. Trigger work items are given top priority in our menu list!
If you need to rely on your local gunsmith, please point him to www.bellmtcs.com for everything he needs to do the job right.
Whether you do-it-yourself or rely on your local gunsmith, you will find a full complement of all the Contender springs also, as well as the frequently lost forend dovetail locks:
http://www.bellmtcs.com/store/index.php?cid=624
Cold, gloved fingers need a firm grip on the hammer, and there is no safer, more secure means of getting a grip on the hammer than our Triple Lock hammer extension:
http://www.bellmtcs.com/store/index.php?cid=93
I strongly recommend keeping the Pro Hunter swivel hammer pointed to the rear and installing our hammer extension. In my opinion it is far safer than the angled Swivel Hammer spur position.
Forend, grip, and buttstock screws:
http://www.bellmtcs.com/store/index.php?cid=592
Weaver and Weaver type scope bases seem to be the most popular, and one of the best choices for a rugged, economical Weaver scope rings are the Weaver Tactical rings:
http://www.bellmtcs.com/store/index.php?cid=613
See more about Bellm TC's and connect with us on
LinkedIn: http://www.linkedin.com/pub/kurt-michael-bellm/77/508/128?trk=shareTw
and "Like" us on Facebook: https://www.facebook.com/bellmtcs
Wishing you a fantastic fall hunting season!
Mike Bellm
