Sold 18” 300WSM barreled action + reloading supplies, brass, bullets

Status
Not open for further replies.

Wright406

WKR
Rating - 100%
14   0   0
Joined
Feb 11, 2018
Messages
876
Love the caliber but moving to something in the long action realm. I really enjoyed this rifle due to its ability to be easily carried and wielded in the mountains but not give up too much to reach out there. Anyways, here’s the details.

Round count is at 165 total.

18” Preferred Barrel carbon/nickel blend, hand lapped, 1:10 twist, threaded 5/8x24. Preferred barrels did all gunsmithing. Build for use of 170-190 grain projectiles.

Kelblys Nanook RH Short Action

Was able to get a few 5 shot groups in the .35-.45 range but it averages .5MOA accuracy with 178 ELD-X projectiles.

Also included:

-RCBS matchmaster micrometer die set with .335 SAC bushing
  • 71 pieces of 1x fired ADG brass, other 29 are loaded with 3 different recipes but can pull bullets if desired.
  • 1 box New 50 pieces Norma Brass
  • 50 pieces of 2x fired Norma brass from a previous 300WSM.
  • 40 pieces of 8x fired Norma brass from my last 300WSM that now I only I use for setting up dies, trimmer, dummy loads etc. Maybe could be used for reloads but I deemed them unserviceable once I got new brass.
-138 total 178 ELD-X (same lot number)

Triggertech special curved trigger included.

Muzzle brake not included but can be purchased.

Want to sell everything together for simplicity but I understand some people don’t need everything, if there’s enough interest to split I’ll consider it.

Asking $2,500 for all of it + insured shipping to your FFL.
 

Attachments

  • IMG_2865.jpeg
    IMG_2865.jpeg
    381.3 KB · Views: 411
  • IMG_2864.jpeg
    IMG_2864.jpeg
    321.1 KB · Views: 400
  • IMG_2863.jpeg
    IMG_2863.jpeg
    244.3 KB · Views: 345
  • IMG_2862.jpeg
    IMG_2862.jpeg
    423 KB · Views: 396
Last edited:

warrant

WKR
Rating - 100%
7   0   0
Joined
May 19, 2017
Messages
419
Good deal, good seller
Thursday morning bump


Sent from my iPhone using Tapatalk
 

Buckslyr

Lil-Rokslider
Rating - 100%
1   0   0
Joined
Mar 5, 2019
Messages
102
What kinda velocities did you you see with that 18” pipe? Considering the same build with an atlas lite I’ve got sitting on the shelf.

Bump for a sweet lookin build! Good luck with the sell.
 
OP
Wright406

Wright406

WKR
Rating - 100%
14   0   0
Joined
Feb 11, 2018
Messages
876
I’d have to look at my data book but I believe I was at 2850 with 178s and not hitting pressure.
 
OP
Wright406

Wright406

WKR
Rating - 100%
14   0   0
Joined
Feb 11, 2018
Messages
876
Roger. Couple nibbles on the whole spread but if the barreled action gets scooped then I can separate items.
I'm interested in the ADG brass if you're ready to split up the kit. I could be talked into the Norma, but I run ADG in my Sako 75
 
Status
Not open for further replies.
Top