7 prc 180gr. Eld-m and hybrids

[blade2_4x4]

Hey everyone I have a few questions on the 180 eld-m's and hybrids. Was wondering if there is a good starting range for seating depths. Also I'm running adg brass with N565, been trying to find pressure signs and haven't yet and have gone up to 71.6 gr. Has anyone gone that high? Got is showing I could go up 72.7 before I hit 65000 psi.

 

[khuber84]

Hybrids typically shoot well 20-35 off, eldm usually 25-50 off touch. This have been my observations with many eldm and Berger hybrids in serval weights and calibers.

 

[blade2_4x4]

Hybrids typically shoot well 20-35 off, eldm usually 25-50 off touch. This have been my observations with many eldm and Berger hybrids in serval weights and calibers.

Thank you that helps. I've started 20 off for both and wasn't impressed

 

[waitforit]

I've had great results in 2 rifles, 2 different calibers with ELDMs seated at 40 thou.

Also, in my 7PRC, using N570, ADG Brass, ELDM 180... I have hit 3000 fps with 73.5 grains and no impact on bolt lift or flattened primers. There is literally no more room in the case though, N570 granules are huge.

 

[blade2_4x4]

I've had great results in 2 rifles, 2 different calibers with ELDMs seated at 40 thou.

Also, in my 7PRC, using N570, ADG Brass, ELDM 180... I have hit 3000 fps with 73.5 grains and no impact on bolt lift or flattened primers. There is literally no more room in the case though, N570 granules are huge.

I'm hitting over 3000 with n565 starting at about 69 grains. Thank you for the help

 

[blade2_4x4]

I've had great results in 2 rifles, 2 different calibers with ELDMs seated at 40 thou.

Also, in my 7PRC, using N570, ADG Brass, ELDM 180... I have hit 3000 fps with 73.5 grains and no impact on bolt lift or flattened primers. There is literally no more room in the case though, N570 granules are huge.

I'm hitting over 3000 with n565 starting at about 69 grains. Thank you