Badass Tikka Builds

[aric007]

Tikka t3x lite 7mm prc
Nightforce nx8 4-32x50mm
Unknown munitions TI pro 3 muzzle brake
Javelin bipod
Vertical grip
Limbsaver recoil pad

Ready for 2025 deer season!

 

[DisplacedHusky]

18” 6 CreedView attachment 924915

Looks great. What barrel and what contour? Also, what are you getting for speeds with factory ammo?

 

[schmidty3]

Herpes build

(Finishing the paint job now)

 

[schmidty3]

All done

(For future reference...make sure that your spray paint doesn't need a primer first. This thing is gonna have leprosy fast! Rookie error)

 

[Frozenlead]

6.5cm t3x varmint stainless
Woox cobra chassis
Atlas works bottom metal (factory mags)
Trijicon credo hx 2.5-15 x44
Nightforce rings
Srs 20moa pic rail

 

[TradLife406]

Bo-jangles my 6 UM
Got the barreled action from Avery. He had 89 through it.
22" benchmark.
She freaking shoots!

Should have my Maven for any day now. Just used a scope off the 22 trainer to fire form with. But she was doing under an inch for 10 shots.

 

[Jamr]

Looks great. What barrel and what contour? Also, what are you getting for speeds with factory ammo?

Thanks! The barrel is from Preferred Barrel Blanks and it is their Light Hybrid contour. I just shot it for the first time this morning. I was getting 2800 with factory Hornady 103 ELDX. I am planning on reloading for this so I should get a bit more velocity.

 

[loadsandlattes]

I’m not sure if it qualifies, but this is my Tikka 7PRC built on a MDT HNT26 Chassis.

 

[Norcal18]

I love seeing all these builds, but we already have an extensive thread for this. Is there a way to keep it just to one?

 

[Jbenevides89]

Built a 7RM off an action from JA outdoors. Absolutely love it. Built as follows

27” Carbon 6 barrel 8.5 twist
T3X action, sent bolt off for fluting
AG Composite stock, bedded.
Atlasworx bottom metal with AICS 3rd mag
Spuhr rings
Zeiss LRPS5 5-25 scope (others pictured but has LRP now)

Running N570 under Berger 195s in ADG Brass right at the cusp of 3k fps. The original goal was 175 ABLRs at 3k but tried the 195s first and saw it was a possibility so I stuck with them.

 

[Skookem]

Wow nice moose

 

[PC356]

6.5 CM in an Echo chassis that Covenant Arms and Coatings did the CK graphics work on. Kampfeld cut it to 18” and spiral fluted the CTR barrel. Buddy of mine in W TX with MAD MFG laid down the Cerakote Barrett Bronze on the barreled action.

 

[bowrunner81]

18” 6 CreedView attachment 924915

A you tell me what recoil pad you put on this and how did it fit?

 

[Jamr]

A you tell me what recoil pad you put on this and how did it fit?

Limbsaver Airtech 10809. It is a little undersized, but perfectly functional for a hunting rifle.

 

[PC356]

McMillan MT LR Stock, 18” PBB 6 CM barrel. UM Tikka rings, Maven RS1.2 Mil, AB Raptor 8 stack with 3” Reflex. Experimenting with some 90 gr TGKs and H4350 nearly dead up 3000 fps.

 

[Gadjet]

View attachment 932881View attachment 932882McMillan MT LR Stock, 18” PBB 6 CM barrel. UM Tikka rings, Maven RS1.2 Mil, AB Raptor 8 stack with 3” Reflex. Experimenting with some 90 gr TGKs and H4350 nearly dead up 3000 fps.

Very nice! A 6 Creed might be my next build.

 

[bowrunner81]

View attachment 932881View attachment 932882McMillan MT LR Stock, 18” PBB 6 CM barrel. UM Tikka rings, Maven RS1.2 Mil, AB Raptor 8 stack with 3” Reflex. Experimenting with some 90 gr TGKs and H4350 nearly dead up 3000 fps.

Looks sweet! Mine comes in soon. Did you bed your action in that stock or just torque it down?

 

[PC356]

Looks sweet! Mine comes in soon. Did you bed your action in that stock or just torque it down?

Just torqued it down. Will bed it for peace of mind eventually.