propulsionclimbing
Lil-Rokslider
I have for sale a Desert Tech SRS A1 300 Norma Mag with the following specs.
Desert Tech SRS A1 chassis in OD Green with monopod
Hardy Carbon wrapped barrel 1-9 twist, 26”, threaded 3/4x24
DT soft case
5 round 338LM magazine
308 bolt face, shortened bolt stop piece
5 round 308 mag
Torque wrench
Bore guide
This is a fairly lightweight rifle all things considered. As you see it in the pics it weighs 10.7lbs. Barrel only has 25 round through it. I threw together a standard load with the 225 ELD-M, and it easily printed a 3 shot group under ½ MOA. I can also throw in 50 Peterson 300 Norma Mag brass. 25 have been fired once in this barrel, and the other 25 are unfired. Also can throw in some Forster 300NM loading dies if desired.
Reduced to $3500 for everything described above.
Desert Tech SRS A1 chassis in OD Green with monopod
Hardy Carbon wrapped barrel 1-9 twist, 26”, threaded 3/4x24
DT soft case
5 round 338LM magazine
308 bolt face, shortened bolt stop piece
5 round 308 mag
Torque wrench
Bore guide
This is a fairly lightweight rifle all things considered. As you see it in the pics it weighs 10.7lbs. Barrel only has 25 round through it. I threw together a standard load with the 225 ELD-M, and it easily printed a 3 shot group under ½ MOA. I can also throw in 50 Peterson 300 Norma Mag brass. 25 have been fired once in this barrel, and the other 25 are unfired. Also can throw in some Forster 300NM loading dies if desired.
Reduced to $3500 for everything described above.
Last edited:
