WTS Iron Will 200gr Solid and 200gr Wide

Status
Not open for further replies.

Laned

WKR
Rating - 100%
5   0   0
Joined
Aug 12, 2018
Messages
389
SOLD

Two Iron Will S200 with 2 replacement main blades. 1 bleeder blade has a bent tip (in photo). That broadhead is on the far left under the S200 sleeve.

Two W200 with 1 replacement main blade that has tip chipped off. The replacement blade makes for a good practice head (in photo).

The blades and ferrules are all interchangeable to make 200 grain broadheads.

All have been shot through foam. The chipped tip W200 main blade went through a deer and nicked a rock.

$113.39 tyd for everything


d5c59589cc843fa51cc40ac5033f7cb6.jpg
b329f81e0461e6dcee7d359a644a17d2.jpg
5c7e3470fb4c78839c80a976b38eec4b.jpg


Sent from my SM-G715U1 using Tapatalk
 
Last edited:
OP
L

Laned

WKR
Rating - 100%
5   0   0
Joined
Aug 12, 2018
Messages
389
After G&S, that's $110 to me for everything.
Over $200 new for all of this.

Sent from my SM-G715U1 using Tapatalk
 
OP
L

Laned

WKR
Rating - 100%
5   0   0
Joined
Aug 12, 2018
Messages
389
$97.93 tyd
Another way to look at these is
- 4 ferrules
- 3 clean bleeder blades + 1 bent tip bleeder blade
- 2 clean Wide blades + 1 chipped tip Wide blade
- 4 clean Solid blades

No matter if you use these Wide blades or these Solid blades, you'll end up with 200 gr broadheads.

For example, you could pull the Solid blade out of one, put in the chipped tip Wide blade with the bent tip bleeder to make 2 hunting Wides, 1 practice Wide, 1 Solid, and have 3 extra Solid main blades.
 
Last edited:
Status
Not open for further replies.
Top