Ambush Green Riser.
Sitka Elevated ll Limbs.
I have the following mods but may be able to get what you need at the local pro shop. Bow will come with one mod of buyers choice.
SW E 70 / 85
SW E 75 / 85
SW D 70 / 85
Included / As pictured:
Black Gold Rush 5pin sight with Light.
G. R. Y. G. R.
019 pins.
Hamskea Hybrid Hunter Pro Micro Tune.
I cut the full containment cage on the right side. The face of the screws on the launcher blade, mounting screw and another set screw are showing surface rust. Works flawlessly without issue.
Shrewd Quick Disconnect.
Matte black.
Straight.
Shrewd Vantage 7”
Black.
UltraView BeeReel Grip
I used acetone to remove the yellow around the sides. Came off clean but did make the grip a little gritty which actual made it better in my opinion.
Engage Grip.
Limb Legs.
SCS with rope.
TopHat Kit.
I believe it is a full kit with the hats that are currently installed. I will verify if needed.
I built the strings and cables that are currently mounted. 452x Sunset Orange with .014 Halo Serving. Bowstring was just built and installed. I did build this string with 28 strands. Cables are considered used but in good condition and alot of life left in them.
There are typical marks around the sight and the rest if they were removed. The only place that i can see that is considered a blemish is on the upper portion of the riser where the limb pock makes contact with the riser. A small piece of paint chipped off the riser due to the contact. Small, pen tip in size mark on the bottom cam edge.
The bow is in very good condition.
$1100
Paypal Friends and Family or Money Order Only.
I would be more than willing to FaceTime or talk to anyone on the phone that is interested.
Sent from my iPhone using Tapatalk
Sitka Elevated ll Limbs.
I have the following mods but may be able to get what you need at the local pro shop. Bow will come with one mod of buyers choice.
SW E 70 / 85
SW E 75 / 85
SW D 70 / 85
Included / As pictured:
Black Gold Rush 5pin sight with Light.
G. R. Y. G. R.
019 pins.
Hamskea Hybrid Hunter Pro Micro Tune.
I cut the full containment cage on the right side. The face of the screws on the launcher blade, mounting screw and another set screw are showing surface rust. Works flawlessly without issue.
Shrewd Quick Disconnect.
Matte black.
Straight.
Shrewd Vantage 7”
Black.
UltraView BeeReel Grip
I used acetone to remove the yellow around the sides. Came off clean but did make the grip a little gritty which actual made it better in my opinion.
Engage Grip.
Limb Legs.
SCS with rope.
TopHat Kit.
I believe it is a full kit with the hats that are currently installed. I will verify if needed.
I built the strings and cables that are currently mounted. 452x Sunset Orange with .014 Halo Serving. Bowstring was just built and installed. I did build this string with 28 strands. Cables are considered used but in good condition and alot of life left in them.
There are typical marks around the sight and the rest if they were removed. The only place that i can see that is considered a blemish is on the upper portion of the riser where the limb pock makes contact with the riser. A small piece of paint chipped off the riser due to the contact. Small, pen tip in size mark on the bottom cam edge.
The bow is in very good condition.
$1100
Paypal Friends and Family or Money Order Only.
I would be more than willing to FaceTime or talk to anyone on the phone that is interested.
Sent from my iPhone using Tapatalk