Tikka + TO84 + NXS torque values for mounting

[stephane110]

Anyone have insights on the torque settings for mounting?
Comparing the sportsmatch and Nightforce instructions I see different values:

Sportsmatch rings instructions - 15 in-lbs
Nightforce instructions - 25 in-lbs

For the dovetail clamp screws, the sportsmatch instruction say 38 in-lbs for my size of hex screw.

 

[sierracharlie338]

You can split it and go 20 in pounds. Depending on the cartridge you are shooting you might be able to get away with 15. Really it’s personal preference but I generally run 20 in pounds on ring caps these days unless I get some movement from a heavy recoiling cartridge

 

[Formidilosus]

Anyone have insights on the torque settings for mounting?
Comparing the sportsmatch and Nightforce instructions I see different values:

Sportsmatch rings instructions - 15 in-lbs
Nightforce instructions - 25 in-lbs

For the dovetail clamp screws, the sportsmatch instruction say 38 in-lbs for my size of hex screw.

With dozens of TO84’s used very heavily.

Degrease, loctite and-

20-25in-lbs on rings caps
Tight on base screws. More than 38in-lbs. I use the Allen wrench and tighten by feel until it isn’t going to move anymore without stripping or breaking- you can feel it.

 

[SamsonMan22]

I run mine at 25 in/lbs for the top, I put the bottoms ones on at 65 I believe.

Edit*

I used 65 for the ht073 which uses a larger screw, on the t084 I used the supplied wrench and just cranked them on there so no idea on the torque number but they are TIGHT.

 

[stephane110]

With dozens of TO84’s used very heavily.

Degrease, loctite and-

20-25in-lbs on rings caps
Tight on base screws. More than 38in-lbs. I use the Allen wrench and tighten by feel until it isn’t going to move anymore without stripping or breaking- you can feel it.

I think I’ve seen you mention this before, but action screws on Tikka @ 65 in-lbs right? Do you loctite these too?

 

[Formidilosus]

I think I’ve seen you mention this before, but action screws on Tikka @ 65 in-lbs right? Do you loctite these too?

Yes. Avery screw and thread gets degreased and thread locked.