What did you do in the reloading room today?

[Roboz]

Oh, and finally making room for a new charge master! Pretty excited about that one!

 

[Mike D Texas]

About to start experimenting with the NAS3 cases.

I bought 20 round of loaded ammo so I could pull bullets and hopefully see what type of powder they are using.







Charge weight with 150 NBT bullets is 50.5 grains of unidentifiable powder. Looks like a flattened ball powder with either a copper removing agent or a temp stabilization agent. Has that tan/green color like Varget or H4895.





Factory ammo on left, reseated one on right. I pulled the 150 NBT with my RCBS collet die with about the same effort as a brass cased cartridge. The I ran it through my Redding bushing neck die with no issues, set final neck diameter with a mandrel then seated the 168ABLR with no perceivable additional effort above a typical brass cased cartridge.



Velocity data forthcoming.

 

[Matt5266]

200 more 9mm subs on the single stage. Found more powder and primers i forgot i had haha. Time to reorganize soon

 

[49ereric]

Another 100 223 mixed cases I had primed now loaded with W748, Mag primer and a hornady 2270C 60 grain bullet.
Set the rock chucker up with the rcbs ram priming tool to prime more cases.

 

[Backcast88]

Loaded up some 135 SMK with n160 and some 140 TGK with RL23 for a 270 ladder test.

Also loaded a some 150 TTSX for my 30-06 to confirm some data and play with seating depth a little.

 

[streamerfish]

Loaded 1k 9mm rounds for uspsa and practice.

 

[JF_Idaho]

Loaded up 100 223, was gonna do 200 but got bored.

Starline
77tmk 2.260
23.4 8208
Rem 6 1/2

 

[BCsteve]

50 rounds of 6.5 PRC in Lapua brass and 145gr Sierra TGK.

 

[BCsteve]

 

[Pilsner]

Today I deprimed, cleaned, annealed, sized, chamfered and de-burred over 400pc of 223 and 150pc of 6.5 Creedmoor.

I did much the same but with more 6.5 creed and different brown water.
Also spent 2.5 days cleaning out and unf*cking my shop. Even found my work bench top for the first time in a year.

 

[49ereric]

Primed and then loaded a 100 223 mixed cases using W748, mag primer & hornady 2270C 60 grain bullet. Plenty of 223 cases to swage up next.

 

[Nykki]

Prepped 300 357 cases. Primed and loaded 100 of them, 11grs AA7 behind 50 Nosler sphg 158gr and 50 Sierra jsp 158 gr. Will see which one shoots the best out of my Dan Wesson 15-2. Have to wait for a little warmer weather. Below zero in the morning and teens mid afternoon aren't good shooting weather for an old man.

 

[Jstumbaugh]

Put together a ladder test while I'm waiting for my 1:8t 223 Rem 700 to get to the gun shop. Loaded 77 smk with h4895 from 22gr-24gr at 2.26 coal.

 

[ResearchinStuff]

Yesterday I finished the 20 gauge stockpile. Reloading season is over, time to get back to the range.

 

[Fireflyfishing]

First use of my SAC barrel vice. Worked like a charm to pull a Aero barrel of an Aero Solus. Now, I just need that HCA 25 CM to show up.

It always feels good when you buy the expensive tool that’s supposed to make your life easy…and it does!

 

[MD97756]

Prepped more alpha 6creed brass I’ll have to go shoot my next days off. Hopefully confirm the data I have and be ready for spring bear.

 

[alexnelon]

Ruined 50 pieces of brass and a sizing die because I’m a clown and ran every single piece without even looking at them. Got sand in the die somehow and paid the price for being lazy.

 

[338edge]

Developing a new load for both my LRKM. One is a 338 Terminator and the other is a 338Edge +P. Also for my 7mmstw but it has 1,000 rounds down the tube. Probably time to rebarrel lol

 

[crowlja]

Loaded up some more Nosler 150gr ABLR in 6.5 PRC. Think tomorrow night I'll load some 150 SMKs.

 

[Austin Kaufman]

Loaded up 5 different loads for my 6 arc to try some new bullets and powder. Then loaded up some 6 creeds with 105 hybrid targets for my PRS gun.


Sent from my iPhone using Tapatalk