I’m sending 180eldms at 2915 with h1000 out of my 20” proof, n570 is a little bit faster. I tried magpro, staball hd and a handful of others but they were all on the slow side.
I'm working up a load for my 180gr ELDMs with H1000 and Retumbo.
I've got a 22" barrel on order, and one of my concerns with using H1000 is complete burn. I use Mac OS so I can't run GRT to try to get a feel for "complete burn". With the 20" barrel, are you seeing any signs of incomplete burn? How are the groups? Thanks!I’m sending 180eldms at 2915 with h1000 out of my 20” proof, n570 is a little bit faster. I tried magpro, staball hd and a handful of others but they were all on the slow side.
Wow that seems like it’s cooking with a 180 and h1000. What brass are you using and are you seeing any signs of excessive pressure?I’m sending 180eldms at 2915 with h1000 out of my 20”
ADG, it’s running pretty hot so I’m not holding my breathe at long brass life. I’m right at the ragged edge of ejector marks but usually don’t see any pressure signs. I let it go 200 rounds without cleaning and it sped up to 2965 and had tons of pressure issues.Wow that seems like it’s cooking with a 180 and h1000. What brass are you using and are you seeing any signs of excessive pressure?
Have you found much difference between the two in velocity? In my 22" 300prc the velocities are within 10fps of each other so far. Only have 30rds down the barrel though.I'm working up a load for my 180gr ELDMs with H1000 and Retumbo.