Another stock build thread

[eLightfoot]

Been having fun following along Decker and others stock building posts. Being the restless tinkerer/diy guy that I am I thought I’d give it a shot.
I always thought about getting some blanks from CalicoHardwoods (they made all the high end weatherby stocks) as it’s like five mins from my house. Of course as soon as I committed to going over there I found out they went out of business.
Luckily I found a local ish guy on Instagram who sells all sorts of milled walnut. He dug me up some old blanks left over from the by gone days. Got what I consider a great deal on them.

 

[eLightfoot]

Not pictured is the blank I’m actually working on. So I ended up getting three claro blanks and two English blanks. Not sure what I’ll do with the others yet, definitely a tikka stock at some point.

I recently inherited some of my dads guns, (none were anything interesting) but one was a Sears model 53 30-06. To make it interesting it will need a new stock and barrel so that’s where I’m at. Ordered a blank from PBB, going to have kampfield chamber it up to a 6mmAI. Posted a wtb add here on the slide for brass and scored a healthy supply.
Now for the stock I wanted the traditional look. I did make the comb higher than the factory relic though. The bolt barely clears. Traced the shape out with a sharpie and brought it to work to use the band saw. I didn’t get any pics.
Next I squared up the forend and grip cap and glued some ebony on useing the two dowel method(also no pics).
Pretty much used my eyeball to lay things out and a caliper helped make sure the measurements were right. Without an existing stock to measure from this would have been 10x harder to do. I’ve basically done the inletting with a palm router, a 1/2” chisel, a 1/2” gouge, and a dremel with a 5/8” sanding drum. Once I could drop the action in I used dychem blue grease to coat the barreled action and locate the high spots. I’m just about done with the inlet and read to begin shaping.

 

[eLightfoot]

Pics

 

[eLightfoot]

More

 

[Decker9]

This is awesome! I’m diggin these build threads, some nice work being put out! Makes me want to dive into a blank I have here, but my summer chore list is just to big lol.

I’m a sucker for the classic stock style, and am excited to see yours take shape. Nice choice on the Ebony too! Can tell already it’s going to look great with that nice piece of walnut.

 

[Macintosh]

Love it! Bummer calico went out of business, they were a go-to for good quality but reasonably priced blanks. I was actually trying to get ahold of them recently and suspected as much. Now I gotta find another source I guess!

 

[Mtnmilsurp]

That's some beautiful wood! I've done several ebony tips on stocks I modified but have always been too intimidated to try a grip cap. How did you make sure you had the surfaces flat enough to glue it up with no gaps? Did you freehand it with a sanding block? I saw a Larry Potterfield video where he used a mill but I don't have one of those. Love the ebony grip cap!

 

[eLightfoot]

That's some beautiful wood! I've done several ebony tips on stocks I modified but have always been too intimidated to try a grip cap. How did you make sure you had the surfaces flat enough to glue it up with no gaps? Did you freehand it with a sanding block? I saw a Larry Potterfield video where he used a mill but I don't have one of those. Love the ebony grip cap!

Luckily I made a pretty dang flat cut from the get go with the band saw. Then cleaned it up with a sharp chisel. From there some 200 grit sand paper on a flat block. Kept sanding it flat till the gaps were all gone. Any micro gaps that might have existed were squeezed out while clamping. Whole process probably only took 15 minutes.

 

[eLightfoot]

Added the butt pad to get an idea of what I need to shape off. Also put in two recoil cross bolts that I fashioned out of some door Hw parts from work. Used a plug cutter to make ebony plugs and glued em in. Everything fit nice and tight.

 

[Mtnmilsurp]

Did you use any inletting black? I don’t see any. If not, how did you do that?

 

[eLightfoot]

Did you use any inletting black? I don’t see any. If not, how did you do that?

Yes I did, dychem blue grease.