Jardo
WKR
Haven’t seen any since last summer. H1000 is scarce too.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Powder Valley got a shipment in a couple weeks ago. Sold out in hours, but hopefully it's starting to roll in. Seen some h1000 at sportsman's warehouse the other day.Any word on where to rl 26 yet?
I've learned that if you have over 96% case fill it really burns cleaner and is more consistent in velocity consistency (standard deviation) and better behaved in temperature swings, even with powders that aren't well known for temperature stability like double bases powders.I replaced my 6x47L H4350 load with RL16 this season, it runs a little dirtier but is not temp stable and takes less powder.
I've learned that if you have over 96% case fill it really burns cleaner and is more consistent in velocity consistency (standard deviation) and better behaved in temperature swings, even with powders that aren't well known for temperature stability like double bases powders.
I shoot R26 in one of my 28 Noslers & have 1400+ rounds through it. I havent looked at the throat but the targets tell me it still a shooter.
Any more testing done with rl 23 and rl 26 with adg brass in the 6.5 PRC? These are the two powders I'm looking at when my rifle get finished, but was surprised to see such a low velocity with that combo.
I worked up a load using RL23 and Barnes 127LRX with ADG brass and BR2 primers. 2" @ 100yds 5-shot group. roughly 3150fps out of 22" bbl.
hope that helps
Thank you, it does. Just seems like a large velocity decline for 30 gr. of bullet weight. I was hoping to get 3000ish with a 24” barrel in the 156’s, but maybe not?
Just saw an 8lber locally, they won’t ship. It’s out thereReviving this guy to see if anyone has seen any RL23 anywhere or knows what's up with the supply backlog. Had an eye out for a month or so and nada thus far
Just saw an 8lber locally, they won’t ship. It’s out there
data IS limited for many cartridges and for "some" nonexistent - I called their tech line to possibly find load data for my 338/06, they said "that's not a SAAMI cartridge, no data will be posted" (and with the clear attitude that THEY are the last word in powder technology) I have established data for RL 15 and RL 22 that I will continue to use, otherwise I have no use for ALLIANT as a company, JMO but I load ALOT