Sheep Rifle Project

OP
O
Joined
Sep 24, 2018
Messages
531
That the Z3 3-10x42 or 4-12x50? If its the 50, looks like the clearance is great with the medium talleys
That’s the 42mm. I have actually switched to mediums on all my rigs as I find it has much better head/eye alignment on stock for repeatable cheek weld.
 
OP
O
Joined
Sep 24, 2018
Messages
531
Can you get the custom turret on that scope? I got one on my swaro 3.5X18 and love it. It only goes out to about 700 yards or so but that is probably more than enough for a mountain rifle.
Can’t that I am aware of but you could on the z3 3-12 x 50
 
OP
O
Joined
Sep 24, 2018
Messages
531
An update to my “final” configuration. I wasn’t able to squeeze out the accuracy I know the 6.5 cm is capable of so swapped my 7 mag in. On hindsight it was probably just a bad range day due to it being freezing cold but I’m pretty happy with where this landed after another day at the range. I could save another two ounces switching to Talleys but it is shooting so well I don’t want to mess with it and waste more ammo re zeroing. I settled on Federal Terminal Ascent leaving the barrel at 3000 FPS. I was able to verify drops out to 770 yards.

A few requests for parts list so here it is:

-Tikka superlite cerastrat 7mm RM. (has cerakote, factory brake, and Teflon coated bolt from factory)
-Wildcat composites ultralite stock
-Mountain Tactical bottom metal & Elite action screws
-Sportsmatch 1 inch medium rings
-Swarovski Z3 3-10 BRH
 

Attachments

  • C0ABD895-F762-4A2C-84DC-24FEE9BE9AFA.jpeg
    C0ABD895-F762-4A2C-84DC-24FEE9BE9AFA.jpeg
    133.5 KB · Views: 57
  • 0F3FF908-7893-446E-A000-48926DD61C0F.jpeg
    0F3FF908-7893-446E-A000-48926DD61C0F.jpeg
    138.9 KB · Views: 55
  • 14B3B1B2-74EA-40F8-BC4D-30BB5B02C85D.jpeg
    14B3B1B2-74EA-40F8-BC4D-30BB5B02C85D.jpeg
    214.5 KB · Views: 53
  • 8842AEDB-1A33-4BD2-8D59-EB1E23195943.jpeg
    8842AEDB-1A33-4BD2-8D59-EB1E23195943.jpeg
    207 KB · Views: 52
Top