Mar 3, 2019 #1 C Cedarsavage WKR Joined Oct 16, 2017 Messages 719 Location Upper Michigan I have a squeaky cable guard that makes noise when I draw. It's worse when it's real cold. What can I do to remedy this?
I have a squeaky cable guard that makes noise when I draw. It's worse when it's real cold. What can I do to remedy this?
Mar 3, 2019 #2 OR Archer WKR Joined Feb 29, 2012 Messages 3,035 Location Mesa,AZ Clean the cable rod. If it’s a plastic cable slide I’d replace it with a good Teflon slide.
Mar 3, 2019 Thread Starter #3 OP C Cedarsavage WKR Joined Oct 16, 2017 Messages 719 Location Upper Michigan Where can you get one of those? You just take it out right; no bow press?
Mar 3, 2019 #4 OR Archer WKR Joined Feb 29, 2012 Messages 3,035 Location Mesa,AZ What bow do you have exactly?
Mar 3, 2019 #5 C Chad E WKR Joined Jan 22, 2013 Messages 622 Location Eastern Washington I had this issue on a hoyt. A good cleaning of the cable rod fixed the issue completely. I eventually changed t he cable slide but a good cleaning should clear up your problem.
I had this issue on a hoyt. A good cleaning of the cable rod fixed the issue completely. I eventually changed t he cable slide but a good cleaning should clear up your problem.
Mar 3, 2019 #6 Wellsdw WKR Joined Jul 11, 2017 Messages 457 Location Belews Creek NC clean everything as stated above. Also a touch of graphite powder dry lubricant will help too.
Mar 5, 2019 Thread Starter #7 OP C Cedarsavage WKR Joined Oct 16, 2017 Messages 719 Location Upper Michigan OR Archer said: What bow do you have exactly? Click to expand... bear domain
Mar 5, 2019 #8 OR Archer WKR Joined Feb 29, 2012 Messages 3,035 Location Mesa,AZ You can replace the cable slide without a press but it’s much much easier with one.