The Rokslide 95 (Ruger American 😁)

[MarkOrtiz]

Has anyone used JB weld or anything to stiffen the original stock? Seems easy, but wondering if there are any tips.

I want to stay with the original stock because the LOP is so easily adjusted and this is my kids' rifle. 22 ARC

I am about to add an SRS mini arca and I also ordered the weight kit for the butt end.

I used carbon arrow shafts and epoxy to stiffen the stock up on ours.

 

[Deere_Man]

Duramag has 6.5 Grendel-6 ARC-22 ARC flush fit mags back in stock, along with the 350L mags.

Ruger American AR Pattern Flush-Fit Mags

Duramag SS Flush fit magazine for the Ruger American ranch and predator rifles in 350Legend, 5.56, 400 Legend, 6.5 Grendel, 6mm ARC, 22 ARC

dura-mag.com

 

[BLJ]

Ruger®

ruger.com

Cold hammer forged bull barrel.

This may be the death of the CTR.

 

[Sixpack]

I saw that too! I grabbed two 6.5grendel/6arc mags to try in my 7.62x39. I will report back on how it works!

 

[BigEd36]

Ruger®

ruger.com

Cold hammer forged bull barrel.

This may be the death of the CTR.

And they sure are pretty;

 

[Stache Attack]

If anyone has a pmag stock for a predator or ranch I would pick up. Like to get out of my rotary mag without going to a chassis

 

[Luke S]

You don't need a pmag stock. Get a 450 Bushmaster mag and it will work with 308 based cartridges and fit in the rotary mag stock.

 

[Stache Attack]

You don't need a pmag stock. Get a 450 Bushmaster mag and it will work with 308 based cartridges and fit in the rotary mag stock.

Looking for 5.56/223

 

[huntsman22]

You can buy the bottom plastic direct from Ruger.

 

[Deere_Man]

If anyone has a pmag stock for a predator or ranch I would pick up. Like to get out of my rotary mag without going to a chassis

I believe that in order for ar15 magazines to work on the Ruger American, it also needs to have a cutout scalloped spot machined off of the bolt. The first 223/5.56 Ruger American models didn’t have it.

 

[Deere_Man]

Do you have a link for the video? Thanks.

I can’t find the video anywhere! But I did find a Ruger Forum thread regarding the subject:

https://www.rugerforum.net/threads/diy-short-ar-style-magazines-for-ruger-american-rifles.393163/

 

[BLJ]

I’ll check that out. Thanks.

 

[Stache Attack]

You can buy the bottom plastic direct from Ruger.

Only on the ones that are newer. Older models didn’t come with the cut out around the action screws

 

[tak]

Thanks! Ordered a couple flush fit for ARC

 

[huntsman22]

another Woox Wildman.....

 

[tak]

Added some JB weld to strengthen the forend of the factory stock. Still flexes, but much better and you really have to make an effort to have it contact the barrel.

Also added the Ruger weight kit to the rear. 4/6 weight to add 1 lb. Balances nice, and my 9 yo shoots it well.

Top it off with the flush fit mag and the SRS mini Arca, and now I might be stealing it from my son!

I couldn't find any aftermarket stocks with a LOP that is as short as the factory

 

[Oddfellow]

Ruger American Gen 2 Predator 6mm ARC
Vortex Diamondback Tactical 4-16 FFP
Hornady Precision Hunter ELD-X 103 gr

 

[goalie]

I'm now officially torn between a Ranch g2 in 5.56 or 22 ARC.

I have so much brass and so many 75g/77g bullets that 5.56 may win out

Any issues with the Jard trigger in the OEM stock?

 

[huntsman22]

no

 

[BLJ]

I'm now officially torn between a Ranch g2 in 5.56 or 22 ARC.

I have so much brass and so many 75g/77g bullets that 5.56 may win out

Any issues with the Jard trigger in the OEM stock?

Nice to know that there is no way for a bad outcome.