- Thread Starter
- #41
maninthemaze
WKR
- Joined
- Aug 20, 2016
- Messages
- 895
Correct. A bullet won't fit inside a fired brass. I use a Lee universal decapping die to just push the spent primers out. Then I would clean in a SS wet tumbler, then FL size with a .315 bushing, clean again with the SS media, then begin the loading process.Just to clarify, you can't fit a bullet in a freshly fired piece of brass or are you decapping/tumbling first?
Sent from my iPhone using Tapatalk
The decapping die doesn't contact the brass at any point. Even without decapping I can't push a bullet in a fired case. Not even cleaning the ID of the neck to remove any carbon from the firing.
Sent from my SCH-I545 using Tapatalk