Broz
WKR
Never read the entire thread but will add what I always check first if drops are off.So this is what I have done ad im not sure its correct but seems to work so far.
I usually shoot at around 500 and true the ballistics using the velocity.
Then a stretch out to as far as you can make consistent hits. For me 750 the I tweak the BC a little. And the velocity some more.
I haven't been able to get a hit at 1200 yet.
And I haven't found a way to get the perfect ballistic arc to match my round perfectly.
I figured true it up as far as possible because the margin for error is larger the closer in.
For instance I'm about 3" high at 500 w my ballistics tried up at 750.
@Broz @Ryan Avery
You both have alot of experience with the kilo.
1: Confirm 100 Yard zero
2: Make sure scope tracks true to .25 moa
3: Make sure all data entry points in the "MV-Temp" area are zero's
4: Confirm Velocity with quality Chrono
5: Use Applied Ballistics proven G7 BC
6: If shooting high, Be sure to use a quality rear bag and that the stock is not dropping under recoil