Silicone lids group buy

[LionHead]

Looking to see whose interested in a possible group buy.

I've searched for a silicone coffee lid to act as boiler lid and leak proof sipping lid for my toaks 750ml mug.

Every search yeilded lids far to small for the task. I found http://www.ezpots.com/lids.html and secured a sample.

On the bottom of the page is part# lid-96 advertised to fit 93-98mm rims. The company is a wholesaler and requires a minimum of $50 purchase. At $2.50 each I'd need to get 20 lids minimum.

I managed to get a single lid as a sample and it works exactly how I wanted it to.

It's a snug fit that requires some stretching to get it on the toaks but not too fiddly, holds secure and doesn't leak.

It was more difficult getting the lid to fit my old GSI cup with a fatter roller rim than the toaks. Fit might also improve when warmed up but I have not tested yet.

I wouldn't mine getting 2 or 3 more but certainly don't need 20. Would anyone else be interested in these lids?

In the 750ml I can get a 100g fuel can, mini Bic, BRS3000 x-cup and Lid96 with an x-mug securing the top.

It should work on the 550ml and 650ml but I don't know what stove+extra combo you'll be able to nest.

Sent from my XT1650 using Tapatalk

 

[AK Troutbum]

I'd be in for a couple lids if they will for sure fit a Toaks 650.

 

[realunlucky]

I'm in for 3

Sent from my moto z3 using Tapatalk

 

[Clarktar]

I'm in for three

Sent from my SM-G935V using Tapatalk

 

[LionHead]

I'd be in for a couple lids if they will for sure fit a Toaks 650.

I don't own a 650 but toaks lists the 550, 650 and 750 as their 95mm diameter mugs so believe it would

Sent from my XT1650 using Tapatalk

 

[AK Troutbum]

I don't own a 650 but toaks lists the 550, 650 and 750 as their 95mm diameter mugs so believe it would

Sent from my XT1650 using Tapatalk

sounds good, count me in.

 

[LionHead]

Any color preference? Red is the obvious choice for not loosing it at camp but they also have WHT, BRO or BLK .

If we can get about 10 more lids spoken for I'll order and we can PM for details

$51 for 22 lids and $14 flat Shipping. Comes to $3 per each lid plus my shipping cost. Estimate about $2-3ish bucks

Sent from my XT1650 using Tapatalk

 

[Jbehredt]

Two for me please. Red is good.

 

[C Bow]

I will go for 3 Black for my toaks 650

 

[jhm2023]

I'd like to get 2 red ones.

 

[WyoElk]

I’d take one... any color is fine


Sent from my iPhone using Tapatalk

 

[Clarktar]

I'll take two whites and a red.

Sent from my SM-G935V using Tapatalk

 

[realunlucky]

Red would be my preference but any color would work for me

Sent from my moto z3 using Tapatalk

 

[AK Troutbum]

Red works for me as well, thanks.


Sent from my iPhone using Tapatalk

 

[Brendan]

I'll take 3, mix of colors but not picky.

 

[wind gypsy]

I'm in for 2, red works fine for me.

 

[BradArnett]

Im in for 3. Any color.

 

[Sterlingsilva]

I'd be in for 2

 

[Reburn]

I would be in for 2. brown is my choice but like others. any color will do im not picky.

 

[LionHead]

Ok order is in . I may come up short a few and sorry Reburn I didn't order brown, I had the order before your post.

I did forward the info to toaks. And I'll also forward them the result of this group buy. I asked them to be a retailer for the lids because of the fit/use/ compatibility with their mugs.

I also ordered a 450 toaks for the GF (her burffday will be on our next mountain scouting trip) and hoping the smaller lids I got on Amazon work just like the Lid96 does. I'll post results.

For info the lid is a stretch fit when cold. I came up with a technique to mount it without burning fingers. Dunno if I should do a video or just explain with pictures.

I've got a 16hr shift tomorrow so I'll get more info when I can and I'll PM with details when I get the lids in

Sent from my XT1650 using Tapatalk