Page Master
WKR
- Joined
- Jul 23, 2020
- Messages
- 433
What is a standard 3U point on? I have full length, 555g, 32'' arrows drawing 27.5'' at 47# but at 20 yards it still is almost 2' I have to hold under. I was using a 5/8'' high nocking point but I was getting bad broadhead and bareshaft flight so I moved it down and have great flight but it is a lot to hold under. Before I was 14'' at most and usually 8-9''.
I did not want to use a fixed crawl, but I've put a 3/8'' lower secondary nock tie to use as a FC and its got me 8-10'' at most which makes me significantly more accurate. Is 18-22'' a standard hold under ? It just trips me up to hold at a critters feet or a foot below the animal at 15 yards when I am 20' above it and I lose accuracy trying to determine my gaps.
I did not want to use a fixed crawl, but I've put a 3/8'' lower secondary nock tie to use as a FC and its got me 8-10'' at most which makes me significantly more accurate. Is 18-22'' a standard hold under ? It just trips me up to hold at a critters feet or a foot below the animal at 15 yards when I am 20' above it and I lose accuracy trying to determine my gaps.