Prime Logic CT5...

[gord1895]

The only gripe with the set up is a rattle in my sight. It comes and goes. Driving me crazy. Think it may be the fiber optics for the pins. Probably need to call BG and get some ideas.

Check all the obvious things first like all the screws but I had a consistent rattle on my BG sight forever. Finally discovered it is the micro adjusters. Once I lock down the set screws for each adjustment I give the micro knob a turn until it gets tension on it and all rattles go away. Worth a shot.

 

[OG DramaLlama]

Check all the obvious things first like all the screws but I had a consistent rattle on my BG sight forever. Finally discovered it is the micro adjusters. Once I lock down the set screws for each adjustment I give the micro knob a turn until it gets tension on it and all rattles go away. Worth a shot.

Thanks. Will try that. Had a sneaky suspicion it was the micro adjuster as it started after I made my first adjustments.


Sent from my iPhone using Tapatalk

 

[OG DramaLlama]

Rattle kept coming and going. Finally think i found the source.

This little stainless guys was barely loose.

Sent from my iPhone using Tapatalk

 

[OG DramaLlama]

Broadhead tuning consisted of a slight arrow rest adjustment of 1/32nd to the left.

My number 1 and 2 arrows at 80 yards. Prior to rest adjustment. Haven’t had a chance to extend range past 50 with adjustments (damn city life)

Have 4 arrows that are super consistent with the kudos. The rest seem to be less consistent than I would like. At 6” groups at 50 (My effective range) with any arrow.

Will work with a separate broad head, Bone-In, a little this weekend but not inclined to change much.

Hope the MT bulls are fired up come next weekend.....

Sent from my iPhone using Tapatalk

 

[OG DramaLlama]

Archery season came and went too fast.

MT was amazing, but no arrows flew.

My last group at 100 prior to heading out....First time shooting broad-heads at that distance. Very comfy with my 50 yard effective range.

Some base camp shot checking in at 40.

The only mishap.....Found some Pronghorn to chase. Took a wrong step and fell forward wedging the quivilizer hood into the ground. The hood cracked right at the screws. Was able to fix immediately in field (Electrical tape) and tested accuracy that night with nothing out of ordinary. Will need to purchase another molded hood.

All in all, this setup was easy to get going, easy to tune, reliable at long range, and fun to shoot.

Tinkering aside (Fletching tests next year!) looking forward to low maintenance on this bow for many years to come.

Sent from my iPhone using Tapatalk

 

[Don Qui Puncher]

I took two falls this year in the snow and fell with all my weight on the bow once and the next one came down on limbs/cam when I got back to camp shot fixed heads at 50 and it was spot on still.

 

[tylerb4613]

Great looking bow, I bought the same one with 70-80# limbs, except mine is Morel color green limbs and riser.

I also set mine with the Hamskea rest, I'm shooting it @ 75# 28.5: DL with a 500 grain VAP TKO shafts and I'm getting 275 fps.

I ordered a morel riser as well. What colo hamskea did you get?

 

[OG DramaLlama]

I ordered a morel riser as well. What colo hamskea did you get?

I just got the black one...

 

[JasonWi]

I ordered a morel riser as well. What colo hamskea did you get?

All my components are black, makes for really good contrast