Short Draw Arrow Setup-what do you shoot?

Joined
Jun 19, 2019
Messages
364
For those of you that are vertically challenged, such as myself, what is your arrow setup? I am currently shooting an Easton Axis at 455 grains, but am always looking to shake things up a bit


Sent from my iPhone using Tapatalk
 

DB29

Lil-Rokslider
Joined
Apr 4, 2020
Messages
170
5’8” with a 27in draw. Shooting Axis at 525gr, 200gr upfront. I shoot with a guy who is 6’3”, who shoots a lighter weight arrow than mine. My arrows go about an inch deeper than his.
 

wesfromky

WKR
Joined
Nov 23, 2016
Messages
883
Location
KY
65lb prime logic at 27". 300 spine BE carnivores with Iron Will componats - 50gr insert, 25gr collar, 125gr wide head, around 475ish total, I think.
 
OP
M
Joined
Jun 19, 2019
Messages
364
65lb prime logic at 27". 300 spine BE carnivores with Iron Will componats - 50gr insert, 25gr collar, 125gr wide head, around 475ish total, I think.

How long is that arrow?


Sent from my iPhone using Tapatalk
 

Trevor96

Lil-Rokslider
Joined
Aug 27, 2020
Messages
152
Location
Wi
26.5 inch draw 70 pounds
Victory RIP 350 with 60gr stainless inserts
100gr head, total right at 400gr
On the light side but shoots awesome
 
OP
M
Joined
Jun 19, 2019
Messages
364
26.5 inch draw 70 pounds
Victory RIP 350 with 60gr stainless inserts
100gr head, total right at 400gr
On the light side but shoots awesome

What kind of speed are you getting?


Sent from my iPhone using Tapatalk
 

Trevor96

Lil-Rokslider
Joined
Aug 27, 2020
Messages
152
Location
Wi
I didn't shoot it through a chrono yet but it should be 280-290 range
 

Tradchef

WKR
Joined
Aug 30, 2017
Messages
993
Location
Willow Creek, Montana
Compound - prime Rize, 63lbs, 27” draw, 26” axis 400, 150 VPA 2 blade, 470 grains

longbow - rustic archer 66” longbow, 26” draw, axis 400 @ 28.75”, 175 VPA and 75 grain brass insert, 530 grains
 
Joined
Mar 22, 2019
Messages
25
Location
KY
I’ve become a disciple of the hi FOC / heavy’ish arrow. Rarely does being GI Joe sized come with any benefits but in this case it does. Shorter arrows are easier to achieve higher FOC with.
I am launching Victory RIP TKO’s w Ethics Archery components. 90 gn insert & collar + 200 gn Masai broadheads. 576 total grains w Rayzr feathers and nocturnal. Bow is 27” DL and 65lb DW. Super accurate to 60 yds but my hunting shots will all be less than 40 so trajectory penalty is minimized. FOC is just over 26% so they are super stable and hit like a brick. I love this set up.
You have to do the work to tune the arrows and the bow so the broadheads hit w field points. With 200 grains of tomahawk up front, there are no shortcuts. But the payoff is a setup that is very nearly impervious to bone and greatly ups the odds of a humane kill on a less than perfect shot.
 
Joined
Sep 8, 2014
Messages
1,743
Location
Front Range, Colorado
Currently shooting a Prime Logic at 80lb/26.5". 25.5" 250 spine X-Impact shaft, Valkyrie 250 Jaggers and aluminum collars. ~550 TAW at 262 fps. I've liked this setup but I'm planning on mixing it up next year.
Going to an 80lb speed bow. Going to try for 285+ with a 450 grain arrow (not sure on shaft/components yet, but probably Kayuga Pilot Cut G2 150s). I focus on bear/deer/pronghorn for archery, so the 550+ setup isn't necessary.
The Prime is very efficient at short draw lengths and the heavy arrows have been great on the couple of animals I've harvested with them, but I can keep withing 5% of my momentum and gain a lot of trajectory/range back. I'll probably keep the 550 Valkyrie arrows for Africa and elk if I care to archery hunt them.
 
Joined
Jun 17, 2016
Messages
1,237
Location
ID
420 grain setup.
27.5" draw.
68.5 lbs.
277 fps
New to bow, 3 months in, still increasing pull, end up around 283 fps.
FOC: just shy of 15%.
 

Read1t48

WKR
Joined
May 18, 2017
Messages
524
Location
Oregon
Mathews ChillR 70lb limbs cranked all the way down. Maybe 72lb.?
26.5” DL;
252fps. with a 464 grain arrow:
Easton Axis 340 with brass insert and 100gr. heads.
Not the fastest in the world but simple, quiet, and deadly.
 
Last edited:
Joined
Feb 13, 2019
Messages
478
Prime CT3 27.25 inch draw at 72lbs. Gold Tip XT hunter 300 spine with 100 grain insert and 100 grain head. 475 grain arrow or 500 if I use 125s.

Bow is quiet and fast enough for me to feel comfortable shooting game out to 60-70 yards depending on conditions.

I’m right around 270 FPS


Sent from my iPhone using Tapatalk
 
Joined
Mar 21, 2012
Messages
1,168
Location
Missoula, MT
Gold Tip XT Hunter 340 cut to 27.5", 100gr broadhead, 30gr weight screwed into the insert. 420gr total.
27" Draw length, pulling 65#. Elite Impulse 31. ~273 fps.
 

RogerH

FNG
Joined
Jul 10, 2020
Messages
4
Mathews VXR 31.5 @ 74 lbs and 27 inch draw
Easton Axis 340 with 50 gr insert cut to 26.25
125 Quad Exodus
Around 460 gr total
 
Joined
Aug 7, 2017
Messages
349
Location
Colorado
Daughter is shooting 26" GT Falcons with 125gr. Woodsman heads, 45#. Got the job done on a 3x3 muley on Saturday.

Now that she has gotten the bug, some Kinetics are in her future with some added weight up front.

(Of course, the great coaching and training by dad gladly accepts most of the credit for her perfect 35 yard shot (her max range).)
 

Fatcamp

WKR
Joined
May 31, 2017
Messages
5,678
Location
Sodak
Prime CT3 27.25 inch draw at 72lbs. Gold Tip XT hunter 300 spine with 100 grain insert and 100 grain head. 475 grain arrow or 500 if I use 125s.

Bow is quiet and fast enough for me to feel comfortable shooting game out to 60-70 yards depending on conditions.

I’m right around 270 FPS


Sent from my iPhone using Tapatalk

What length do you cut your arrows?
 
Top