Pics of Custom Knives

[EastMT]

I got into it after hunting season a couple years ago, I started off with cheap blades, scales off EBay. I didn’t want to spend a ton on learning materials. I had clamps, dremel, belt sander, so I altered the blades and handles as I preferred. Then I built a kydex press, got a rivet press, made the sheaths. It’s really fun but time consuming. I’d like to make my own blades, but in honesty that’s more than I want to get into it, I really enjoy shaping the handles and installing.

Any guys on here make knives? This thread has my gears turning

 

[Elkchaser24x7]

Hopefully I'm not breaking any rules here.
Alot of good information on knives and makers on Bladeforums
They have a Makers sellers forum.

For Sale: Fixed Blades

www.bladeforums.com

Another knife maker on my wish list is Backwoods Custom Knives

Bill Akers (@backwoodscustomknives) • Instagram photos and videos

24K Followers, 261 Following, 7,261 Posts - See Instagram photos and videos from Bill Akers (@backwoodscustomknives)

www.instagram.com

 

[Nomadx2]

A couple my wife bought me about 15 years ago from a friend at work who made knives. Not a famous maker, but good quality.

 

[MTRaine]

Nothing too fancy, but a little skinner I made a few years ago. Needs a little touch up polishing. I Cut it on the CNC mill, then surface ground it flat after heat treat with a course wheel to give it a little unique striated look to the blade.

 

[NDGuy]

Halfface blade I ordered last summer has been a game changer ! So nice having a full size blade on elk

Definitely check out Half Face Blades

Got this one on the way Half face blades definitely on another level..

Where did you guys pick those HFBs up? Did you buy them off his site on a blade drop? Custom? Ebay?

 

[thinhorn_AK]

I had this one made by a guy who runs a small shop out of his house. It’s made of d2 to steel and holds an edge really well, it’s a tank, it’s not 1/8” it’s the thicker one. The handles are made of ctek and I chose orange so I wouldn’t lose it. I asked him to round the bit of the handle off so it would be more comfortable for marathon skinning sessions.

I got this specifically for moose hunting, I still like my havalon but I wanted to have a big old hunting knife that doubled as a camp knife. I think I ended up paying 250-300 dollars, I don’t remember, it’s been ~ about 5 years now but this thing holds an edge and does great butchering my moose and caribou.

I wouldn’t take it backpacking but when I go hunting with my boat it goes for sure.

 

[callmebubba]

Hopefully I'm not breaking any rules here.
Alot of good information on knives and makers on Bladeforums
They have a Makers sellers forum.

For Sale: Fixed Blades

www.bladeforums.com

Another knife maker on my wish list is Backwoods Custom Knives

Bill Akers (@backwoodscustomknives) • Instagram photos and videos

24K Followers, 261 Following, 7,261 Posts - See Instagram photos and videos from Bill Akers (@backwoodscustomknives)

www.instagram.com

View attachment 244151

I have a backwoods and my dad has a couple. Got them all some years back when they were a little more affordable but they are great knives. I’ll try to get some pictures up eventually.

 

[callmebubba]

Dug through dads literal bag of knives (just the handmade bag, there’s another bag of factory knives lol) and found 2 Backwoods knives in there. The one I have at home is a larger damascus blade.

 

[NDGuy]

Dug through dads literal bag of knives (just the handmade bag, there’s another bag of factory knives lol) and found 2 Backwoods knives in there. The one I have at home is a larger damascus blade.

Very nice

 

[Scottyboy]

What kind of shitshow did you guys have to go through to get one of these knives? Sold out and from the remarks on forums his knives sell out in 30 seconds and not taking orders until next summer lol

Just have be lucky with your timing and be ready to purchase instantly should you see one available.

yes, they usually sell out in seconds...maybe minutes if it’s a big drop on his website.

 

[ARMY_GREEN]

My TK Steingass. I also spent some time on Blade Forums, always missed out on the blades I wanted so I contacted TK on his website.

 

[Rwillis87]

Not too fancy, but here is my custom Buck 110. S30V and Buffalo Horn

 

[IdahoElk]

Some Damascus knives I made.

 

[808hoghunter]

Where did you guys pick those HFBs up? Did you buy them off his site on a blade drop? Custom? Ebay?

I got that one from a drop last month... customs won’t open till mid 2021.. got this hunter skinner in a trade on the way and the noveske green hybrid crow is my main hunting knife..

 

[808hoghunter]

View attachment 243995
Bob Carter when he first started out. O1 steel

Welcome to Fall Creek Custom Knives - Bob Carter Handcrafted Knives

Welcome to Fall Creek Custom Knives. I’ll continue to post photos and shop updates in this section of the website […]

bobcarterknives.com

Nice I have one just like it but custom 5 inch blade..

 

[NDGuy]

I got that one from a drop last month... customs won’t open till mid 2021.. got this hunter skinner in a trade on the way and the noveske green hybrid crow is my main hunting knife..

Here's to hoping I can snag one.

 

[808hoghunter]

Here's to hoping I can snag one.

Don’t waste your time trying to read the description it will be gone by the time your finished.. study his blade shapes .. as soon as you see the shape and color you like ... checkout the rest is in Gods hands .. good luck buddy..

 

[NDGuy]

Don’t waste your time trying to read the description it will be gone by the time your finished.. study his blade shapes .. as soon as you see the shape and color you like ... checkout the rest is in Gods hands .. good luck buddy..

Haha I know what I am looking for now so hoping I can be fast...otherwise I may buy 2 plain Jane Crow JRs both are selling for $325 privately.

 

[808hoghunter]

Crow jr very good all around blades .. don’t over look the disaster jrs .. best all around and it uses a tougher 3v steel.. I may consider selling the disaster jr all black sometime after Christmas.

 

[Elkchaser24x7]

Nice I have one just like it but custom 5 inch blade..

Very nice!