The stalk was difficult for sure.  First, we rode the horses down the spine of the mountain divide to cut some distance.  Then came the sketchy descent through snow-covered cliffs and chutes to get into the burn basin below.  Follow that with a quick and quiet half-mile trek across the burn to a small rocky point I know to be a few hundred yards from where we last saw the bulls.  The wind was good and I wasn’t too surprised when I crested the point to see both bulls still bedded where we had spotted them.  The distance was about 320 yards across the drainage. Easily in range of the Mesa Precision Crux Titanium Carbon Hunter. I could see now the bigger bull was a beamed 6 point, but I didn’t want to stress the size too much for my 13-year-old daughter, Emma, as she crawled to my location for the shot.

Mesa Precision Crux Titanium Carbon Hunter Rifle

Emma settled behind the Mesa Precision Arms Crux Carbon Hunter 300 Winchester Magnum. Visit the Mesa website here. That’s a lot of cartridge for an eighth-grader, but Emma was no stranger to the Crux, already having smacked rocks at 400 yards and beyond during summer practice.  The Crux’ titanium muzzle brake was highly effective and easily made recoil comparable to Emma’s usual 7mm-08 Remington.  Emma found a steady rest above the snow with a combination of my backpack and the Spartan Precision Javelin Bipod.  Emma rested the Leupold Mark 5’s PR1-MOA reticle right in the crease at the front shoulder.  The Triggertech trigger broke clean and the 215 grain Berger Hybrid hit exactly at point-of-aim across the canyon.  The muzzle barely moved at the shot.

Accuracy and effective recoil management allowed Emma to tag her first bull.
Great Performance

I was impressed, not only with my incredible daughter but also with the rifle.  This wasn’t first blood with the Crux, either.  It had already accounted for a mountain goat on a backpack hunt at 10,000 feet, and my best ever antelope buck over the wheat fields of central Montana.  In all conditions, it performed.

The author made use of the long-range precision of the Mesa Precision Arms Crux
MPA Crux Action

The rifle starts with the Crux action.  Available in both stainless steel ($1,198) and titanium ($1499) versions, the 75-degree throw, twin lug, push-feed design is timed nicely.  Both actions come with a 20 MOA rail included.  An integrated recoil lug leaves no room for play and it is compatible with most Remington long-action inletted stocks.  The bolt has a unique honeycomb pattern milled in with a tough finish. I didn’t have any function issues whatsoever, but it was nice to know that the bolt is field-strippable without tools should the need arise.

The Barrel

Mesa threads on a Proof Research carbon fiber barrel to maintain accuracy and save weight.  The standard barrel is a Sendero Light contour in 1:10 twist, but they accommodated me with a Sendero contour in 1:9 twist catered to longer/heavier bullets for the 300 Winchester Magnum.

The Crux titanium action is a solid platform for a full Mesa rifle or custom build.
Muzzle Brake

Mesa Precision Arms (MPA) also makes their own self-timed muzzle brakes in both stainless steel ($175) and titanium ($225).  I shot the rifle both with the MPA titanium brake and my trusty APA Lil’ Bastard brake.  I couldn’t feel a difference in felt recoil, but the reduction in muzzle jump was noticeable.  The top ports on the MPA brake were functional.  The MPA brake measured in at 2.6 ounces.

The Titanium Mesa Precision brake is both light and highly effective.
Altitude Stock

The other highlight accessory was the Altitude stock.  The Altitude has a monte carlo porter contour, but hybridized with a fat vertical grip.  I love this stock.  I pulled out the action and weighed the Altitude stock at a feathery 22.7 ounces.  It is easy and instinctual to bring up offhand, but really comes into its own when stretched out prone.  MPA works with AG Composites to produce the stock, which is only available through MPA and has a fair retail price that starts at $599 for a Remington version.  A Tikka version is a bit heavier and runs $625.

Mesa Precision offers their light and stiff Altitude stock both on full builds and separately.
Beautiful Craftsmanship

The build of the rifle was impeccable.  It should be at a retail price of $4950.  While that is a substantial investment, it shows in the finish.  The bedding work was perfect.  Getting the action in and out of stock took a bit of effort.  The Triggertech trigger was clean, crisp, and right at 2 lbs.  Feeding and function were hiccup-free.  Mesa offers the Crux Carbon Hunter in popular long range calibers:  6.5 Creedmoor, 6.5X284 Norma, 6.5 PRC, 28 Nosler, and 300 Winchester Magnum.

The bedding and overall gunsmithing of the Crux Carbon Hunter was excellent.
Accuracy

So far so good, but how did it shoot?  I have been lucky enough to test a number of really accurate rifles.  Rifles that print groups at or below 1 MOA consistently, and with varying ammunition.  The MPA Crux Carbon Hunter is the most accurate hunting rifle I’ve ever tested.  Consistently, five-round groups with factory Berger and Hornaday ammunition printed under 1/2 MOA.  Often, groups were under 1/3 MOA.  Handloads were similar with some of my old favorite loads (212 ELD-X and 200 Nosler AB) printing in the 1/2 MOA range without any load development.  It was a testament to the MPA gunsmithing and Proof Research carbon fiber barrel.

Mesa’s one-piece bolt has a unique honeycomb relief machined finish and is field-strippable without tools.
Overall

Field performance was phenomenal.  Having a long-range capable hunting rifle that all-up and ready to hunt was just a couple ounces over 8 lbs. was a revelation.  A backpack hunt at 10,000 feet for mountain goats puts every ounce at a premium.  Unlike previous long-range hunting rifles I’ve used, the slender Mesa Altitude stock slides right into my scabbard for horseback hunting.  That lightweight and tough, durable finish shined through on belly crawls for antelope as well.  Superior recoil mitigation pays off when your eighth grader can use a light, large-caliber rifle and concentrate on executing the shot without fear of recoil.

The downsides?

$4950 is a lot of money for a rifle.  While this is a downside in that hunters can get good hunting rifles for far less, I still think it is a good deal for the value provided.  Competitors often have similar rifles at an additional $1000 or more.  I have spent thousands on barrels and gunsmithing chasing accuracy with lesser stock rifles.  If you want the Crux Carbon Hunter performance, but can stand hauling a few more ounces, the stainless steel version is available at $3999, which I think is an outstanding deal for a custom rifle at this level. They also have the “Ascent” rifle starting at $3134 with a Bartlein 5R barrel for the hunter that doesn’t want or need a carbon barrel.

Mesa Precision offers their parts separately from the full build for those that want to build their own dream rifle. Photo courtesy of Mesa Precision.
Conclusion

The Mesa Crux Carbon Hunter is an heirloom quality custom rifle that can be passed from parent to child, but it’s happier out in the woods than guarding the inside of a safe.  It is light, accurate, looks great, and shoots even better.  Hunters will be hard-pressed to find a better custom rifle, period.  For those not seeking a full custom rifle, Mesa offers their parts so hunters can build or accessorize their own rifle.  I think the Crux action is a solid foundation to build your heirloom on, while the Altitude stock and Mesa muzzle brake can be an immediate upgrade for many current rifles out there.

You can comment or ask Matt questions here.

Check these other great rifle reviews:
Previous articleNew Areas and Burns with Jim Carr
Next articleKryptek Aegis Review
Matt Cashell
Matt Cashell is a Montana hunter. Matt has traveled to all corners of his home state chasing whatever game he can. Matt has been lucky to take great trophies in Montana’s classic game species: Rocky Mountain Elk, Mule Deer, and Pronghorn. When he isn’t out chasing big game, he might be pointing a shotgun at flushing roosters, casting flies for Montana’s monster trout, or working on shooting precision long range rifles. Matt has spent more time outdoors than in through his formative years, and has deep roots in family hunting traditions garnered from years of following his father and uncle in Montana’s wild places. Family is important to Matt as he works to pass on those traditions to his five kids in the Bitterroot Valley of Western Montana, with the help of his loving wife, Heather.A self-proclaimed gear geek, Matt continues to pursue the ragged edge of hunting technology, and any small advantage or comfort that can increase his chances of backcountry success. Particularly an optics addict, Matt is always trying to see better, and find those wiley critters before they find him. It doesn’t matter what weapon is used, the hunt and wild places draw him to the woods, time after time. Going in deeper, and hunting harder is always the goal with Matt, and the pursuit of that goal never ends.